Skip to contentSkip to navigation
Safety Relief Valves

Consolidated™️ 2478 Series Pressure Relief Valve

The 2478 Series pressure relief valve has a totally enclosed design for non-corrosive, thermal-relief, liquid service.

Download Product Documentation

Specifications

SPEC VALUE
INLET SIZES 1/2" through 2 1/2"
OUTLET SIZES 3/4" through 2 1/2"
ORIFICE SIZES D, E, F, G, H and J
SET PRESSURE RANGE 15 to 300 psig
TEMPERATURE RANGE -325°F to 406°F
MATERIALS Cast bronze bonnet, brass base and trim and PTFE soft seats are standard
STANDARDS AND REGULATIONS Non-coded
BLOWDOWN 7% - 15%
BACK PRESSURE LIMIT 10% of set pressure

Features and Benefits

  • Low spindle bearing point between the spindle and disc for improved tightness
  • Self-aligning spring washers for repeatability and long life
  • Totally enclosed bonnet to ensure that escaping fluid is properly discharged
  • Precision-wound spring plus 5 percent tolerance on rate to ensure repeatability and maximum tightness
  • Manufactured to ASME Code standards
  • Tested for set pressure on water

Applications

Design limits of 300 psig (20.68 barg) and -325°F (-198°C) to +406°F (+207°C). This product should only be used for non-corrosive liquids. The Consolidated 2478 Series Pressure Relief Valve is not ASME Code capacity- certified. Cryogenic service applications can be satisfied by consulting the factory.

Connections

The 2478 Series Pressure Relief Valve is supplied with 0.5 in. (12.70 mm) through 2.5 in. (63.50 mm) male NPT inlet sizes. The inlet is equipped with a standard hexagon surface for easy wrenching.

Options

  • Sealed Lifting Lever Assembly
  • Spring 17-7 PH SS is available Options
Back to list
Related Products
Model
Manufacturer
Application
Industries Served

From application engineering, valve configuration, to performance testing, supply chain management and aftermarket support, we cover any specific industrial needs.